Torrey Pines Scientific EchoTherm IC30 Heavy-Duty Digital Chilling/Heating Dry Bath

The completely solid-state EchoTherm™ IC30 Large, Heavy-Duty, Digital, Electronic Chilling/Heating Dry Bath is versatile, reliable and easy to use. The IC30 has simple digital controls and a two line alphanumeric digital display that is backlit for easy reading.

The chilling/heating surface is a 5” (12.7 cm) square aluminum plate that is very flat for optimal contact with your sample. When unloaded, the plate surface will reach below 0°C in under two minutes. It will also heat to 37°C in approximately 3 minutes. This rate of chilling or heating may vary with the load on the plate. For instance, temperatures down to 4.0°C can be reached on a solid aluminum block in less than one hour. When insulated, these large blocks can be driven below 0°C. Temperature gradients from the center to the edge of any aluminum block mentioned will be less than 0.5°C at any temperature.

OPTIONAL MODEL:
XT Model: Chilling range expanded to -20°C without sample block. Recommended for holding samples steady at low temperatures without cycling.

• Energy-efficient Peltier design
• Digital control to 1°C from -10 to 100°C
• Control at ambient
• Count down timer (up to 30 days) with alarm and user settable Auto-Off
• RS232 I/O port for control and data collection
• Built-in data logger
• Electronic calibration. User can reset to any local standard
• Compact size uses very little bench space
• UL, CSA and CE compliant
• 12-month warranty

• Maintaining 14°C for ligation reactions
• Maintaining 17°C for storing oocytes
• Store samples at ice bucket temperatures
• Incubating samples in 96-well assay plates, or in aluminum blocks holding 0.2, 0.5 or 1.5 ml centrifuge tubes
• Cooling blood samples prior to coagulation testing
• Storing enzymes or DNA libraries at your work station
• Enzyme reactions and deactivations
• Freezing and storing most any small sample at your workstation
• Working directly on plate surface

Temperature:

• Range: -10°C to 100°C (IC30), -20C to 100C (IC30XT) w/o sample block
• Readability: 1°C
• Accuracy: ±1°C
• Stability: ±1°C
• Sensor Type: Platinum RTD
• Controller Type: PID
• Uniformity: ±0.5°C

Timer:

• Range: 00:01 to 30 days
• Readability: 1 second
• Audible Alarm: Yes, alarm sounds for 1 minute. Timer counts up until turned off.
• Auto-Off: Yes, user settable.

Data Logger:

• Sample times: 1 sec, 1 min or 5 minutes per data point
• Capability: 8110 data points

Electrical:

• Heater/Chiller: Peltier, 100 watts
• Operating Voltages: 100–265 VAC, 50/60Hz
• Power Consumption: 100 watts maximum
• Power Switch: Yes

Dimensions Chilling/Heating Module:

• Width: 8.5” (21.6 cm)
• Depth: 10” (25.4 cm)
• Height: 4” (10.2 cm)
• Weight: 8 lbs (3.64 kg)

• Torrey Pines Scientifc IC30_IC35 Datasheet