Compliance West 1.2x50-12kV Surge Tester, EN 60335

12kV output to perform all tests noted in EN 60335, Paragraph 14. The virtual impedance is 12 ohm, in accordance with the Standard, and the tester will charge within 3 seconds in accordance with the fastest repetition rate allowed by the Standard. For automated pulse train testing, use the MegaPulse TestMinder option, which allows automated pulsetrain testing controlled from a PC.

Ships in a 17" by 36" enclosure.

• Generates the waveforms described in EN60335, Paragraph 14 for testing electrical separation.
• Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation.
• Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse, allowing easy sanity checks and proof to visiting agency engineers of test setups.
• 1000:1 BNC Oscilloscope output option allows quick connections and easy evaluation of output waveforms.
• Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.
• Front panel voltage meter shows residual voltage in charging circuit for safer operation.
• 1-year calibration cycle.
• All test leads included.
• One year warranty

• Output: Up to 12000 Volts open circuit; controlled by front panel knob and displayed on voltage meter. Positive or negative polarity is chosen via front-panel button. Virtual Impedance: 12 ohms or 39 ohms, customer choice
• Voltage Waveform: 1.2x50us @ 400-12kV Open Circuit: Per IEC 60060 Section 19
• Peak Value: 400-12kV ±3% (independent of meter tolerance)
• Front time: 1.2uSec ±30% [Trise= 1.67 (T90%-T30%)]
• Duration: 50uSec ±20% (Time to half-value)
• Current Waveform: (not defined)
  12 ohm tester outputs up to 1000A (peak, short circuit) in accordance with IEC 335 4.1
  39 ohm tester outputs up to 300A (peak, short circuit) in accordance with IEC 335 4.2
• Charge Time: 3 seconds nominal in accordance with the fastest pulse rate in IEC 335.
• Meter Accuracy: ±3% 400-12kV.
• Test Adjustments: Amplitude via front panel knob and shown on front panel digital meter.
• Input Power Requirements: 114-128V, 50/60Hz, 5A
• Weight: 30 lbs. approx. Shipping weight 50 lbs.
• Dimensions: 17 in (W) x 6 in (H) x 17 in (D)

• Compliance West Megapulse 1.2×50-12P.pdf