Compliance West MegaPulse .64x32/3x37-4-1 Telephone Surge Tester, TE001

MegaPulse .64x32/3x37-4-1 15ohm - Designed to generate the surge test described in Para. 17.1.4.1 of TE001. The peak output pulse voltage is 4kV. The output voltage (open circuit) waveform is 640 nSec rise time by 32 uSec duration and the current (short circuit) waveform is 3 uSec rise time by 37 uSec duration. The output impedance of the MegaPulse is 15 ohms. A front-panel button provides reversal of output polarity.To test, the front panel voltage meter is set to 4000V.

• Generates the waveforms required by TE001, Paragraph 17.1.4, for testing Lightning Protection capabilities of TLTE in accordance with other subparagraphs of Paragraph 17.
• Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation.
• Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse, allowing easy sanity checks and proof to visiting agency engineers of test setups.
• Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.
• Front panel voltage meter shows residual voltage in charging circuit for safer operation.
• 11¼ by 4¼ by 12 inch enclosure
• 1-year calibration cycle
• All test leads included.
• One year warranty
• Optional 1000:1 voltage divider network available for oscilloscope connection.
• Optional current shunt for oscilloscope connection is also available.
• Ships with cables, graphs of theoretical and actual waveforms and calibration certificate