Torrey Pines Scientific EchoTherm HS55 Digital 5-Position Stirring Hot Plate

The EchoTherm HS55 is designed to be the easiest to use and most accurate fully featured multi-position stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100 ohm platinum RTD sensor and measurement system.

Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit accessory.

The chassis is cast aluminum and designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.

• 5-stirring positions. All the same speed or each at a separate speed
• Extremely easy use by anyone in your lab
• Platinum RTD temperature measurement for precision and accuracy
• Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface. Heat to 400 centigrade maximum
• Cast aluminum framed ceramic heater top edges stay cooler to prevent burns
• PID temperature control for exact, tight sample control of plate or solution
• Timer goes up to 99 hours, 59 minutes, 59 seconds with settable Auto-Off for exactly timed sample preparation
• Electronic calibration stored in chip. No batteries to replace
• Temperature ramping for exact heating and cooling rates
• Strong motor and magnet for stirring most samples
• Full-featured digital display for checking all parameters instantly
• Fused for safety
• UL, CSA and CE certified

Hot Plate:

• Dimensions: 12” (30.5 cm) x 12” (30.5 cm)
• Maximum temperature of the plate surface: ceramic top: 400°C
• Temperature control type: PID
• Temperature accuracy : 1%
• Temperature regulation, solution or plate: ±1°C
• Heater power in watts: 1200 watts

Temperature Measurement:

• Platinum RTD: 100 ohm, in plate and in probe
• Range: ceramic top: 0-400C
• Readability: 1°C

Stirrer:

• Speed range unloaded: 100–1500 rpm
• Capacity: 5-800 ml beakers of water
• Readability: 10 rpm
• Settability: nearest 10 rpm
• Stirring Positions: 5

Electrical:

• Available in: 100, 115 and 230 VAC, 50/60 Hz
• Fusing: yes
• Line cord: Detachable, 6 foot (1.8 meter), three-wire, grounded

General:

• Dimensions, unpacked: 12.5” (31.75 cm) wide, 18.0” (45.7 cm) deep without line cord plugged in, 4.5” (11.43 cm) high
• Dimensions, packed: 20.0” (50.8 cm) by 16.0” (40.64 cm) by 9.0” (22.86 cm)
• Weight, unpacked: 28 lbs (12.7 kg)
• Weight, packed: 30 lbs (13.57 kg)

• Torrey Pines Scientific HS55 and HS65 Datasheet