Torrey Pines Scientific EchoTherm HP50/ HS50 Compact, Simple Digital and Stirring Hot Plates

The EchoTherm HP50 and HS50 are designed to be the easiest to use and most accurate fully featured hot plates and stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100-ohm platinum RTD sensor and measurement system.

Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit offered as an accessory.

The chassis on both models is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.

• Extremely easy use by anyone in your lab
• Two memory buttons for storing your favorite settings for heater and stirrer for instant, one-button recall and use
• Platinum RTD temperature measurement for precision and accuracy
• Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface. Milled flat cast aluminum top also available
• Cast aluminum framed ceramic heater top edges stay cooler to prevent burns
• PID temperature control for exact, tight sample control of plate or solution
• Timer goes up to 99 hours, 59 minutes and 59 seconds with settable Auto-Off for exactly timed sample preparation
• Electronic calibration stored in chip. No batteries to replace
• 6” (15.24 cm) ceramic glass or aluminum tops
• Strong motor and magnet for stirring most samples
• Full featured digital display for checking all parameters instantly
• Fused for safety
• ETL, CSA and CE certified
• RS232 interface for control or for data collection on a computer

Hot Plate:

• Dimensions: 6” (15.24 cm) x 6” (15.24 cm)
• Maximum temperature of the plate surface: ceramic top: 450°C; cast aluminum top: 450°C
• Temperature control type: PID
• Temperature accuracy: 1%
• Temperature regulation, solution or plate: ±1°C
• Heater power in watts: ceramic top: 400 watts; aluminum top: 400 watts

Temperature Measurement:

• Platinum RTD: 100 ohm, in plate and in probe
• Range ceramic top: 0–450°C; aluminum top: 0–450°C
• Readability: 1°C

Stirrer:

• Speed range unloaded : 100–1500 rpm
• Capacity: 2 liters of water
• Readability: 10 rpm
• Settability: nearest 10 rpm

Electrical:

• Available in : 100, 115 and 230 VAC, 50/60 Hz
• Ceramic top: 100 and 115 VAC, 4 amp; 230 VAC, 2 amp
• Aluminum top: 100 and 115 VAC, 4 amp; 230 VAC, 2 amp
• Fused: Yes
• Line cord: Detachable, 6 foot (1.8 meter), three-wire, grounded

General:

• Dimensions, unpacked: Ceramic top: 7.0” (17.8 cm) wide, 10.0” (25.4 cm) deep, 4.5” (11.43 cm) high
• Dimensions, unpacked: Aluminum top: 7.0” (17.8 cm) wide, 10.0” (25.4 cm) deep, 4.5” (11.43 cm) high
• Dimensions, packed Ceramic and aluminum tops: 15” (38.1 cm) by 9” (22.86 cm) by 9” (22.86 cm)
• Weight, unpacked Ceramic top: 7 lbs (3.17 kg)
• Weight, unpacked Aluminum top: 7 lbs (3.17 kg)
• Weight, packed Ceramic top: 9 lbs (4.07 kg)
• Weight, packed Aluminum top: 9 lbs (4.07 kg)

• Torrey Pines Scientific HP50 and HS50 Datasheet