Mensor CPT6010 Digital Pressure Transducer

DISCONTINUED ITEM-Recommended Replacement: AMETEK Jofra ASC400 Advanced Signal Calibrator

The CPT6010 Digital Pressure Transducer is a high accuracy pressure measurement component that uses either RS-232 or RS-485 to communicate with a host computer over long distances. Any MS-DOS compatible PC with an available serial output port can serve as the host controller.

The CPT6010 Transducer is characterized over the full pressure and temperature range to achieve 0.020% FS accuracy with 0.006% FS precision. This accuracy specification includes linearity, hysteresis, repeatability and temperature errors.

Also featured is an output which is updated at a rate of 50 readings per second. System designers will appreciate the flexibility offered by having highly accurate pressure transducers that are not tied to a front panel and which may be located remotely.

For remote operation the transducer equipped with RS-485 can be located up to 4,000 feet from the host. A simple cable can accommodate both the power and the two-way communications requirements.

• 0.020% FS uncertainty
• Ranges from 0-15 psi up to 0-6000 psi
• Temp comp. 15-45 deg. C
• Absolute or gauge configurations
• Pneumatic or hydraulic media
• RS-232 or RS-485 communications
• 304 Stainless steel housing

• High accuracy transfer standard
• Internal pressure transducer in OEM devices
• Pressure standard in test & calibration stands
• Hydrology, oceanography
• Aerospace, wind tunnels

• Mensor CPT6010 Datasheet.pdf