Compliance West MegaPulse DF-1P Isolation Surge Tester

The DF-1P Isolation surge Tester is designed to generate the waveform described in AAMI DF-1, Figure A.2., for the Lead Connector electrical isolation test in AAMI DF-1, Annex A. The test can be set to automatically conduct the first 490 cycles of the test, and then stop testing to allow laboratory personnel monitor the last 10 cycles in accordance with the Standard. Voltage and current BNC outputs make waveform analysis convenient.

The test signal includes the waveform cutoff at 750V/18msec as shown in Figure A.2. Please see the Standard Figure A.2, and the actual output of the MegaPulse DF-1P Isolation Tester.

A front-panel switch reverses the output polarity. Additionally provided with BNC oscilloscope output for voltage (100:1) and current (1V/mA) for output monitoring.

The waveform output is 1.5uSec rise time, with a 18mS duration, with an output impedance of 500 ohms.

MegaPulse DF-1P Isolation surge Tester ships complete, ready to perform the DF-1 test:

• TestMinder to conduct automated repetitive testing
• Current cutoff and waveshape truncation
• BNC Current Jack (1V/mA)
• BNC Voltage Jack (100:1)
• Cables
• Graphs of theoretical and actual waveforms
• Calibration Certificate.
• One-year warranty.

• Generates the waveform required for the Lead Connector Test, AAMI DF-1, Appendix A, and described in AAMI DF-1, Figure A.2. The waveform is truncated at 50% of peak value and 18mSec as required.
• Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation.
• Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse DF-1P isolation, allowing easy sanity checks and proof to visiting agency engineers of test setups.
• BNC Oscilloscope outputs allows quick connection and easy evaluation of voltage and current output waveforms.
• Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.
• TestMinder computer control allows automation of the required 490 cycles; then the operator can conduct the last 10 cycles in which the current waveform must be monitored. (Waveform capture is not provided).
• 1-year calibration cycle.
• All test leads included.
• 1 year warranty

• Maximum Voltage Output: 1500 V
• Voltage Rise Time: 1.5 uS
• Voltage Duration: 18 mS
• Current Rise Time: 1.25 uS
• Current Duration: 18 mS
• Meter Accuracy: ±5 %
• Operation Ttemperature: 15-40 °C
• Relativity Humidity Range: 0-90 % Non-condensing
• Standards: AAMI DF-1 Fig A.2 Isolation
• Storage: No
• Product Weight: 35 lbs
• Warranty: 1 Year
• IP Rating: N/A
• Calibration: 1 Year
• ECCN Number: 3B992
• HTS/Schedule B: 9030.39.0100
• Product Dimensions: 17 W x 17 L x 5.75 H
• PLC Interface: Optional
• Autotriger: Optional
• Continuous Full voltage: Optional
• Testminder: Optional
• Energy Calculation: Optional
• Power Supply Voltage: 120 VAC 50/60 Hz
• Data Logging: Optional
• What Is In The Box: Megapulse DF-1P Isolation, 2 high voltage Test leads, 18 AWG Line power cord, and Instruction manual
• Interfaces I/O USB

• Compliance West MegaPulse DF-1P Fig A.2 Isolation Datasheet.pdf
• Compliance West MegaPulse DF-1P User Manual.pdf