Compliance West MegaPulse DF-1P Current Carrying Surge Tester

The DF-1P megapulse Tester is designed to generate the waveform described in AAMI DF-1, Figure B.2., for the connector cavity current-carrying test in AAMI DF-1, Annex B. The test can be set to automatically conduct the first 490 cycles (500 ± 50 as show in standar)of the test, and then stop testing to allow laboratory personnel monitor the last 10 cycles in accordance with the Standard. Voltage and current BNC outputs make waveform analysis convenient.

A front-panel switch reverses the output polarity. Additionally provided with BNC oscilloscope output for voltage (100:1) and current (1V/A) for output monitoring.

The waveform output is 1.05uSec rise time, with a 18mS duration, with an output impedance of 15 ohms.

MegaPulse DF-1P Current carrying Tester ships complete, ready to perform the DF-1 test:

• TestMinder to conduct automated repetitive testing
• BNC Current Jack (1V/mA)
• BNC Voltage Jack (100:1)
• Cables
• Graphs of theoretical and actual waveforms
• Calibration Certificate.
• One-year warranty.

• Generates the waveform required for the Current carrying Test, AAMI DF-1, Appendix B, and described in AAMI DF-1, Figure B.2.
• Designed with operator safety in mind: Set up the EUT to the right and behind the tester, and a right-handed operator will find himself standing to the left of the tester, allowing maximum separation.
• Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse DF-1P, allowing easy sanity checks and proof to visiting agency engineers of test setups.
• BNC Oscilloscope outputs allows quick connection and easy evaluation of voltage and current output waveforms.
• Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.
• TestMinder computer control allows automation of the required 490 cycles; then the operator can conduct the last 10 cycles in which the current waveform must be monitored. (Waveform capture is not provided).
• 1-year calibration cycle.
• All test leads included.
• 1 year warranty

• Maximum Voltage Output: 1300 V
• Current Duration: 18 mS
• Meter Accuracy: ±5 %
• OperationTtemperature: 15-40 °C
• Relativity Humidity Range: 0-90 % Non condensing
• Standards: AAMI DF-1 App B Figure B.2
• Storage: No
• Product Weight: 35 Lbs
• Warranty: 1 Year
• Calibration: 1 year
• ECCN Number: 3B992
• HTS/Schedule B: 9030.39.0100
• Product Dimensions: 17 w x 17 L x 6 H
• PLC Interface: Optional
• Autotriger: Optional
• Continuos Full Voltage: Optional
• Testminder: Optional
• Energy Calculation: Optional
• Power Supply Voltage: 120 VAC 50/60 Hz
• What Is In The Box: Megapulse DF-1P Current carrying 2 high voltage Test leads 18 AWG Line power cord Instruction manual
• Interfaces I/O: USB

• Compliance West MegaPulse DF-1P Fig B.2 Current Datasheet.pdf
• Complinace West MegaPulse DF-1P Current Carrying User Manual.pdf