Compliance West MegaPulse 10x700-2.5 Surge Tester, EN60950

DISCONTINUED ITEM-Replacement Model: Compliance West MegaPulse 10x700-7PF Surge Tester, 2000-7000V, 10x700-7 Voltage Waveform,39 ohm 1 ch

Surge testing for En60950, Annex N, Table N.1, Line 1 for Data Processing Equipment.

The 10x700-2.5 is designed to test the separation of TNV-1 and -3 circuits from user-contacted parts as described by the test in Paragraph 6.4.2.1. The waveform generated is in accordance with the instructions in Annex N, Table N.1, line 1. In accordance with these requirements, the 10x700-2.5 can generate the required waveform with up to 2,500 volts peak A front panel switch reverses output polarity. Use with a general purpose oscilloscope for waveform capture.

• Ships with cables, graphs of theoretical and actual waveforms.
• Calibration Certificate
• Options include relay outputs for PLC control, and a 1000:1 oscilloscope output BNC jack.
• One year warranty

• Model: MegaPulse 10×700-2.5.
• Complies with the requirements of EN 60950, Annex N, Figure N.1 and Table N.1, Line 1.
• Voltage Open Circuit: To ~2100V.
• Accuracy: +/- 3%, No load voltage waveshape 10x700uSec.
• Pulse Front Time: 10us +/- 30% (1.67 times between 30% and 90%), per IEC 61180.
• Pulse Time to Half Value: 700us +/- 20%, per IEC 61180.
• Internal Virtual Resistor: 40 ohms.
• Polarity: Pos / Neg.
• Trigger: Manually or PC automation. (optional)
• Lead Time: 6- 8 weeks.
• Input Power: AC120V / 60 Hz. (other optional)
• Weight: 20 lbs.
• Dimensions: 11-1/2” x 13” x 5” (120V in), 3U x 17” x 17” (240V in), 6U x 17” x 17” (IEC switch)

• Compliance West MegaPulse 10×700-2.5 Datasheet.pdf
• Compliance West Megapulse 10×700-2.5 User Manual.pdf