Chat with us, powered by LiveChat

Compliance West HT-3000PR Adjustable AC/DC Output/Ground Continuity Tester, 2kVAC/ 2.8kVDC

condition: Brand NewPart #: CW-HT-3000PRAvailability: Out of StockInfo Message: DISCONTINUED ITEM
Request Quote

DISCONTINUED ITEM-Replacement Model: Compliance West HT-3000S AC/DC Hipot Tester/Ground Continuity, 2kVAC/ 2.8kVDC 

The HT-PR Series Hipot Tester features an adjustable ground continuity test in range of 0.08 Ω - 1.50 Ω. Additional features include: auto-offset for test leads up to 1.00 Ω; performs 0-2000 AC or 0-2800 DC hipot tests, neutral/ hot to ground leakage current test up to 20 mA AC or 5 mA DC. Easy to use and connect, ships complete with cables, manual, and calibration certificate. Made in the USA.

Package Contents:

- HT-3000PR Hipot Tester
- HT-PR Product Manual
- A 18 AWG Test Lead (Alligator Clip/Banana Plug ends, black)
- Ground Continuity Connector Tip
- A red 18 AWG High Voltage Test Lead (Alligator Clip/High Voltage jack)
- A 18 AWG Line Power Cord to provide power to the HT-PR
- NIST Traceable Calibration Certificate to MIL-STD45662-A

  • High precision leakage current, duration and ground continuity settings.
  • Allows no load setup of leakage current and test dwell times.
  • Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
  • Leakage currents can be set from 1-20 mA AC or 1-5 mA DC in 0.1mA increments.
  • Dwell times can be set from 1-60 seconds in 1 second increments.
  • Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
  • Small and light. 9.25″ wide x 4.75″ high x 10″ deep. 14 lbs. But rugged enough to test manufactured housing.
  • Ground continuity check is defeatable for testing two-wire products.
  • Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
  • J2 and J3 cords allow connection of pigtail power leads.
  • Simple test outcome judgement. Green lights mean pass – red lights mean fail. Failing tests sound a buzzer as well.
  • Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
  • Operation Instructions are printed on the rear panel for easy reference.
  • In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems. RED lights and a buzzer leave no question if a failure has occurred.
  • Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
  • Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).
  • Voltage Test Type: AC/DC
  • Voltage Range: 0-2000 AC 0-2800 DC
  • Leakage Current Set Point: 1-20 mA AC 1-5 mA DC
  • Input Voltage Requirements: 117-127 V, 50 /60 Hz
  • Fuse Requirements: 120 V, 2 A Slow Blow
  • Arc Detect: Independent High Frequency Circuit
  • Leakage Detect: Independent Low Frequency Circuit
  • Ground Continuity Set Point: 0.08 Ω – 1.50 Ω, Defeatable
  • Ground Continuity Test Current: 100 mA
  • Test Time Range: 1 – 60 Seconds
  • Ramp Time Range: 1 – 5 Seconds
  • Voltage Meter Accuracy: ± 2 %
  • HV Shutdown by Ground Fail: < 7 mS
  • Duty Cycle: 100%
  • Discharge Time: < 7 mS VAC; < 1.3 Sec VDC at open circuit
  • Transformer Power: < 500 VA
  • Pass/Fail Repeatability ± 3 %
  • Output Connector: NEMA plug, High Voltage Test Jack
  • Display: 4 digits LED display
  • Test Indicator: Led indicators
  • Failure Indicator: Led indicators and buzzer
  • Programmable: No
  • PLC Interface: Optional
  • TestLink (With GF-30AC): Optional
  • Computer Control: No
  • Voltage Hold on failure: No
  • Top Mounted Handle: Optional
  • Test Defeat: Ground Continuity
  • Autoreset on Pass: Optional
  • Operation Temperature: 15 – 40 °C
  • Relative Humidity Range: 0 – 90 % Non-condensing
  • Dimensions : 9-1/4″ wide x 4-3/4″ high x 10″ deep
  • Weight: 14 Lbs
  • Calibration: One year calibration Certificate
  • Test Cords: Return Lead, Power Cord; Ground Continuity Connector Tip; J2 and J3 Optional; Alligator Clip
Your product has been sucessfully added to the wishlist.
Name: Compliance West HT-3000PR Adjustable AC/DC Output/Ground Continuity Tester, 2kVAC/ 2.8kVDC
Quantity: 1
Cart Total:
Product has been added to your shopping cart.
Name: Compliance West HT-3000PR Adjustable AC/DC Output/Ground Continuity Tester, 2kVAC/ 2.8kVDC
Quantity: 1
Cart Total:

Create an Account

Already have an account? Login