Compliance West MegaPulse 1.2x50-7200PF Surge Tester, EN 60335

Built with the test in IEC 60335, Section 14 in mind. Built in a 3U enclosure, it can provide outputs up to 7200v with a virtual impedance of 39 ohm, and is provided with our fast charge power supply to allow repetitive pulses within 3 sec. The waveform generated is in accordance with IEC 61180. For automated pulse train testing, use our MegaPulse TestMinder option, which controls from a PC.

MegaPulse 1.2x50-7200PF 39 ohm is a general purpose tester with 1.2x50 waveform in accordance with IEC 1180-1. The peak output can be adjusted between 400 and 7200V. The tester has a virtual impedance of 39Ω. There is no defined current waveform. This pulse is in accordance with the requirements of IEC 60335, paragraph 14, Table 6 up to a rated Impulse Voltage of 6kV. 3 second charge time between pulses. Polarity can be switched using a front panel switch.

• Surge Tester built to the requirements of EN60335, for use in judging Insulation Systems as described in Table 6 of EN60335. The tester provides impulses form 400 to 7200V peak.
• Complies with the requirements of IEC 61180-2
• Positive and negative waveform delivery. Choose via a front panel button.
• 7200V/600A peak waveform output. In tolerance down to 400V/33A. Current waveform is undefined, in accordance with EN60335
• Voltage waveform 1.2uSec rise, 50 uSec duration, up to 7.2kV
• Tester internal impedance is 12 ohms
• 39 ohm tap for higher impedance test optionally available.