Compliance West HT-5000P V2 AC/DC Hipot Tester 5kVac/6kVdc

The Compliance West HT-5000P Hipot Tester is a laboratory tester allowing precise adjustment of the test dwell time and leakage current trip level using the front panel meter. Output is up to 5000Vac at 10mA and up to 6000Vdc at 5mA.
Select AC or DC output via front panel button. Simple for production line personnel, easy to set up.
When a problem is found, the operator can defeat the leakage current limit and dielectric breakdown shutoffs to allow troubleshooting and analysis of problems with the DUT.
The HT-5000P includes precision leakage current and test time setup and viewing from the LED meter. Adjustment is made with no HV output.
The tester is built in a rugged, good-looking benchtop enclosure. It is light and portable. Upon a failure, a buzzer sounds and the high voltage output is terminated for safety. Red lights on the front panel indicate the failure mode.

• Output : 5000Vac 10mA or 6000Vdc 5mA +0 – 10%.
• High precision leakage current and duration settings.
• Allows no load setup of leakage current and test dwell times.
• Once entered, leakage current and test dwell times can be referenced on the front panel display at any time.
• Leakage currents can be set from 1-10 mA AC or 1-5mA DC in 0.1mA increments.
• Dwell times can be set from 1-60 seconds in 1 second increments.
• Small and light. 11.25″ wide x 4.75″ high x 11″ deep. 16 lbs.
• Leakage current and dielectric breakdown shutdowns can be defeated to allow troubleshooting of problems.
• Simple test outcome judgement. Green lights mean pass – red lights mean fail. Failing tests sound a buzzer as well.
• NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
• Operation Instructions are printed on the rear panel for easy reference.
• In-depth testing. Both true Arc Detection and Leakage Current circuits test the product to find problems.
  RED lights and a buzzer leave no question if a failure has occurred

• Withstands a 6” drop to a wooden surface
• Output : 5000Vac 10mA or 6000Vdc 5mA +0 – 10%.
• Current limit and test time set without HV output
• True arc detection via high frequency transformer
• Buzzer, lamp upon fail
• Optional PLC Interface
• Test status with lights
• Failure for Leakage Current, Arc Detect
• Calibration Certificate to MIL-STD 45662-A Included
• Shipping weight 20 lbs.
• Enclosure size 11.25″ wide x 4-3/4″ high(including feet) x 11″ deep
• Meter Accuracy: ±2% 500v-Full scale 15°-40°C(view AC or DC accuracy graph)
• Leakage Current Setting: 1-10mA AC and 1-5mA DC in 0.1mA increments, using LED meter
• Voltage Ramp Time: User adjustable 1-5 sec.
• Test Time: 1-60 Sec in 1 sec increments, using LED meter
• Duty cycle: Continuous
• Discharge Time: AC Instant; DC Dependent on output voltage; progress shown on LED meter
• Test Adjustments: Tamperproof by removing knob
• Input Power Requirements: 114-127Vac 50/60Hz

• Compliance West HT-5000P Datasheet.pdf
• Compliance West HT-5000P User Manual Rev. 5.2.pdf