Compliance West HT-2000S AC Output/Ground Continuity Hipot Tester, 2000 VAC

Compliance West HT-2000S, the newest product of our Hipot Line Testers, the UL Listed HT-S series hipot now comes with an adjustable ground continuity test in range of 0.08 - 1.50 Ω, and Auto-offset for test leads up to 1.00 Ω. Performs 0-2000 AC Hipot Test. Neutral/Hot to Ground Leakage current test up to 20 mA AC. Easy to use and connect. Ships complete with cables, manual, and a Calibration Certificate.

The instrument is a bench-type Dielectric Withstand Tester with AC Output, designed for production line testing. The HT-S features automatic one button operation, with numerous safety features designed to protect the operator.

• High precision leakage current, duration and ground continuity settings.
• Allows no load setup of leakage current and test dwell times.
• Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
• Leakage currents can be set from 1-20 mA AC in 0.1mA increments.
• Dwell times can be set from 1-60 seconds in 1 second increments.
• Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
• Small and light. 9.25″ wide x 4.75″ high x 10″ deep. 11 lbs. But rugged enough to test manufactured housing.
• Ground continuity check is defeatable for testing two-wire products.
• Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
• J2 and J3 cords allow connection of pigtail power leads.
• Simple test outcome judgement. Green lights mean pass – red lights mean fail. Failing tests sound a buzzer as well.
• Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
• Operation Instructions are printed on the rear panel for easy reference.
• In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
• RED lights and a buzzer leave no question if a failure has occurred.
• Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
• Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).

• Voltage Range: 0-2000 AC
• Leakage Current Set Point: 1-20 mA AC
• Input Voltage Requirements: 117-127 V, 50 /60 Hz
• Fuse Requirements: 120 V, 2 A Slow Blow
• Arc Detect: Independent High Frequency Circuit
• Leakage Detect: Independent Low Frequency Circuit
• Ground Continuity Set Point: 0.08 Ω – 1.50 Ω, Defeatable
• Ground Continuity Test Current: 100 mA
• Test Time Range: 1 – 60 Seconds
• Ramp Time Range: 1 – 5 Seconds
• Voltage Meter Accuracy: ± 2 %
• HV Shutdown by Ground Fail: < 7 mS
• Duty Cycle: 100%
• Discharge Time: < 7 mS VAC
• Transformer Power: < 500 VA
• Pass/Fail Repeatability: ± 3 %
• Output Connector: NEMA plug
• Display: 4 digits LED display
• Test Indicator: Led indicators
• Failure Indicator: Led indicators and buzzer
• Programable: No
• PLC Interface: Optional
• TestLink (With GF-30AC): Optional
• Computer Control: No
• Voltage Hold on failure: No
• Test Defeat: Ground Continuity
• Autoreset on Pass: Optional
• Operation Temperature: 15 – 40 °C
• Relative Humidity Range: 0 – 90 % Non-condensing
• Dimensions: 9.25″ wide x 4.75″ high x 10″ deep
• Weight: 11 Lbs
• Calibration: One year calibration Certificate
• Test Cords: Return Lead, Power Cord
• Test Cords: Ground Continuity Connector Tip
• Test Cords: J2 and J3 Optional
• Test Cords: Alligator Clip

• Compliance West HT-S Datasheet