Torrey Pines Scientific EchoTherm HS65 Fully Programmable 5-Position Stirring Hot Plates

EchoTherm™ HS65 Fully Programmable Digital Stirring Hot Plate is the most advanced and easy-to-use units available. In manual operation, simply select the parameter to be set and scroll to the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time.

Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.

• 5-stirring positions. All the same speed or each at a separate speed
• 10-program memory stored in CMOS. No batteries required
• Each program can be 10 steps, where each step includes a temperature, stirring speed, time and heating rate
• Repeat any program 1–98 times automatically. Infinite repeats settable
• Programmable and non-programmable operation
• Platinum RTD temperature measurement for ±1% accuracy
• Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface
• Temperature ramping for exact heating and cooling rates
• PID temperature control to 1°C on plate surface or solution
• Stir 5 – 800 ml of aqueous solutions from 100–1500 rpm
• Timer goes up to 99 hours, 59 minutes, 59 seconds with user settable Auto-Off
• Electronic calibration stored in CMOS
• RS232 interface for control or recording data on a computer
• Custom display of all parameters all the time
• 12-month warranty
• UL, CSA and CE compliant

Programming:

• Memory Capacity: 10 programs
• Individual Program Capacity: 10 steps
• Repeat a program automatically: 1 to 98 times or infinitely Temperature Measurement:
• Platinum RTD: 100 ohm at zero in plate and in probe
• Range: 0–400°C on ceramic plate
• Readability: 1°C

Hot Plate:

• Dimensions : 12” (30.5 cm) x 12” (30.5 cm)
• Maximum plate temperature Ceramic: 400°C
• Temperature control type: PID
• Temperature accuracy: 1% ± of reading
• Temp stability: 1°C
• Heater power in watts: 1200 watts

Stirrer:

• Speed range unloaded: 100–1500 rpm
• Capacity: 5-800 ml beakers water
• Readability: 10 rpm
• Settability: nearest 10 rpm
• Stirring Positions: 5

Electrical:

• Available in: 100, 115 and 230 VAC, 50/60 Hz, 1450 watts
• Fused: yes
• Line cord: Detachable, 6 foot (1.8 meter), three-wire grounded

Dimensions unpacked:

• Width: 12.5” (31.75 cm)
• Depth: 18.0” (45.7 cm) without line cord plugged in
• Height: 4.5” (11.43 cm)

Dimensions packed:

• Length: 20.0” (50.8 cm)
• Height: 16.0” (40.64 cm)
• Width: 9.0” (22.86 cm)
• Weight, unpacked: 28 lbs (12.7 kg)
• Weight packed for shipment: 30 lbs (13.57 kg)

• Torrey Pines Scientific HS55 and HS65 Datasheet