Phase II PHT-960 Digital Shore A Durometer

Designed to test the hardness of Rubbers and Plastics, these sleek hand held hardness testers are crafted and engineered to perform at the highest level of accuracy. An ergonomic lightweight design assists in taking precise and consistent hardness measurements.

Shore A scale is for testing the following materials:

Rubber: Soft vulcanized (ie tire), natural nitrile
Elastomeretric materials (rubber & rubber like): GR-S, GR-1, neopene, thiokol, flexible polyacrylic esters neoprene, thiokol, flexible polyacrilic esters.
Other: Wax, felt, leather etc. (materials that normally yield under fingernail pressure, such as the heel on your shoe)

The PHT-960 is not designed to ASTM specifications and cannot be certified as such.

Shore A scale is for testing the following materials:

• Rubber: Soft vulcanized (ie tyre), natural nitrile
• Elastomeretric materials (rubber & rubber like): GR-S, GR-1, neopene, thiokol, flexible polyacrylic esters neoprene, thiokol, flexible polyacrilic esters.
• Other: Wax, felt, leather etc. (materials that normally yield under fingernail pressure, such as the heel on your shoe).

• Measuring range: 0-1000HSA (0-100 HSD)
• Deviation: <1%H
• Resolution: 0.5H
• Digital read out
• Auto Hold feature
• Accurate and repetitive deviation = 20~90HSA
• HSA<+/-1 grade
• The units are not designed to ASTM specifications and cannot be certified as such.
• Uses 1-SR44 Button Cell Battery
• Custom rugged carry case

• Phase II PHT-960 & 980 Manual.pdf