Phase II MET-U1A Ultrasonic Hardness Tester

DISCONTINUED ITEM-Recommended Replacement: Phase II PHT-6000 Series Ultrasonic Portable Hardness Tester

The PHASE II ultrasonic portable hardness testers are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Unlike the standard Dynamic hardness testers, these "state-of-the-art" portable hardness testers incorporate "Ultrasonic UCI" technology, which enables the hardness testing of very thin and small workpieces, which otherwise could not be tested accurately using a portable device.

Non-destructive in it's function, these hardness testers allow for the testing of highly sensitive or finished parts that previously could not be tested in an operational setting. The non-destructive (ndt) feature of these hardness testers allow the operator to accurately test parts without causing physical or structural damage that would normally lead to disposal or refinish of operators part. That translates into less scrap parts/ lower mfg costs due to necessary inspections.

PHASE II offers two models of ultrasonic hardness testers that are capable of measuring the surface hardness of a broad variety of metals on flat, round, thin or large surfaces. Accurate measurements of steel, cast steel, alloy steel, aluminum, brass, bronze and copper are easily attained with this compact instrument.

• Perform hardness tests on variety of metals from thin to very large parts
• Display test results in all various hardness scales. Scales: HRC, HRB, HRA, HB, HV, HRN, HRT, HS, HLD
• Printout to PC via USB interface w/ extended memory locations
• Easy To Read Menu Operation
• Large LCD Display w/ Back Light
• USB Interface
• Automatic Conversions to: Brinell, Rockwell, Vicker and Leeb
• Automatic Mean Value
• Data Archive Capacity
• Dimensions: 7.25” x 3.16” x 1.68” (H x W x D)
• Complete with Base Instrument, 10N (1kgf) Hand-Held Probe, Calibrated HRC Test Blocks, Custom Carry Case, Battery Charger, and Operation Manual
• Model MET-U1A50 comes with 50N (5kgf) Hand-Held Probe

• Steel & cast steel
• Alloy tool steel
• Stainless steel
• Grey cast iron
• Spheroidal iron
• Cast aluminum
• Brass
• Bronze
• Wrought copper alloy

• Probe Type: UCI 10N-Utilizes Vickers style Diamond Indentor
• Tolerance: +/- 3.0% of average from the reference value of the test block with a minimum of 5 tests
• Measuring Range: HRC: 20-67; HRB: 30-99; HB: 75-650; HV: 75-1000
• Minimum Thickness: .040″ (Steel)
• Battery Type: NiMH (C)
• Operating Temperature: 5-104 ° F
• Dimensions (Gauge only): 145 x 80 x 40mm
• Weight (Gauge only): 8.5oz

• Phase II METU1A Data Sheet.pdf
• Phase II MET-U1A Hardness Tester Manual.pdf