Chat with us, powered by LiveChat
Manufacturer:

AMETEK Type T Hydraulic Deadweight Tester, up to 15,000 PSI

condition: Brand NewPart #: AM-TAvailability: Ships within 1-2 weeks
Starting at $7,328.00
Select Options andView Options
×

Base Model Configuration *

Pressure Range Options *

Calibration Accuracy Options *

Pressure Medium Options *

O-ring Options *

Your Configured Product

AM-T
$7,328.00
Availability: Ships within 1-2 weeks

The AMETEK Type T Hydraulic Deadweight Tester offers laboratory accuracy in an instrument that is designed to withstand an industrial environment. These testers are designed to be primary pressure standards and are available in several ranges and engineering units.

Laboratory Accuracy

The AMETEK Type T Deadweight tester is available in ranges to 1,000 bar (15,000 psi). This robust tester has been engineered to withstand the stresses of daily operation in a manufacturing environment and still maintain its accuracy and repeatability. The Type T is constructed of 300 series stainless steel and Monel and is supplied with Buna N O-rings as a standard unit. Viton and EPT O-rings are optional. This deadweight can use a water/alcohol mix or hydraulic oils for the pressure medium.

Configurations

There are two important factors in the selection of the proper deadweight configuration for your application: ranges and location. If you have applications for a single range of tests, then a single piston/cylinder model is a good choice. However, if you have some high pressure and some low pressure testing, the Type T is available with dual piston/ cylinder assemblies that are interchangeable and operate using the same weight set (±0.100% and ±0.025% accuracies) or utilize dedicated weight sets for each piston/cylinder assembly (±0.015% accuracy). If you have the need to use the tester in a location other than a lab, you may need a smaller and more mobile configuration. The single column configuration will be your best selection. These are available with dual piston/cylinder assemblies. For the applications where the tester will be stationary, the dual column configuration is a good choice for those needing multiple ranges. These are supplied with two piston/cylinder assemblies and both columns are installed and ready for use. A selector valve is used to determine which column is in service at any given time.

  • Pressure Range: 100 to 10,000 kPa (10 to 15,000 psi)
  • Accuracy: to ±0.015% of Indicated reading; Accuracy ±0.025 and 0.100% is also available
  • Repeatebility: ±0.005% of Indicated reading
  • Available units: psi, kg/cm2, bar, kPa
  • Flexible configurations to meet differing applications: single column for field use, dual column for lab use
  • Robust construction allows for repeated daily use
  • Proven in design and application to meet your needs
  • Complete tester with tools, cases and fittings
  • Traceable certification supplied with each tester
  • Laboratory or field use
  • Hazardous locations
  • Critical process control loops extending the time between calibrations due to better accuracy and uncertainty
  • Calibrating instruments on custody transfer stations thereby reducing the uncertainty of the measurement
  • Calibrating portable digital calibrators to achieve the highest possible accuracy and reducing maintenance costs
Your product has been sucessfully added to the wishlist.
Name: AMETEK Type T Hydraulic Deadweight Tester, up to 15,000 PSI
Quantity: 1
Cart Total: $7,328.00
Product has been added to your shopping cart.
Name: AMETEK Type T Hydraulic Deadweight Tester, up to 15,000 PSI
Quantity: 1
Cart Total: $7,328.00
Processing...

Create an Account

Already have an account? Login