Agilent/ HP 1172A Low Mass Passive Probe, 20:1, 10 MOhm, 1.3 m

The 1172A is a low mass passive probe. As ICs and components continue to shrink in size, probing has become increasingly difficult. Developed for easy connection to fine-pitch ICs, surface mount components and dense circuit boards, the Agilent 1172A low mass passive probe makes the job of probing and connecting less frustrating. With an exceptionally small, light probe tip (<1 gram), these passive probes provide the same high-performance and reliability you've come to expect from Agilent's high-performance passive probes. Add an ultra-thin, flexible cable, and the Agilent 1172A probe is not only easy to connect, it stay put on the test point.

You'd think a probe this small would be hard to hold, but the Agilent 1172A plugs in to a browser accessory that makes it as easy to hold as a conventional probe. This patented browser concept utilizes a crown point pogo pin that digs in to solder and absorbs small hand movement, so doesn't slip.

When used in conjunction with the Agilent Wedge, the Agilent 1172A provides a reliable hands-free solution for probing 0.5 mm and 0.65 mm IC packages and the probe tip also connects directly to board headers.

• Easy to connect, easy to hold
• Low capacitive loading
• Complements your standard passive probe
• System bandwidth: 500 MHz, passive
• Division ratio (scope + probe): 20:1
• For complete details, click on the Data sheet link.