Agilent HP 10477A 3.3 Volt Pattern Generator Clock Pod

The 3.3V clock pod supports Agilent Technologies 16720A and 1670G-004 pattern generators. Each pattern generator requires at least one clock pod, up to 4 data pods, and lead sets for each clock and data pod. For each 10477A clock pod that you will be using, you will need one (1) 10498A lead set.

• Clock output type: 74AVC16244
• Clock output rate: 200 MHz maximum
• Clock out delay: ~8ns in 14 steps
• Clock input type: 74AVC16244 (3.6 V maximum)
• Clock input rate: DC to 200 MHz
• Pattern input rate: 74AVC16244 (3.6 V maximum; no connect = logic 0)
• Clock in to clock out: approximately 30 ns
• Pattern in to recognition: approximately 15 ns + 1 clock period
• Recommended lead set: 10498A

Clock Pod Configuration

• Logic level support: 3.3V
• Recommended lead set: Agilent 10498A
• Order at least one clock pod for each pattern generator module used as a master or each 1682xA portable logic analyzer
• Design in a dedicated header for pod connection or order one 8-channel lead set for each pod

Clock Output

• Clock output type: 74AVC16244
• Clock output rate: 200 MHz maximum
• Clock out delay: ~8 ns total in 14 steps

Clock Input

• Clock input type: 74AVC16244 (3.6 V maximum)
• Clock input rate: DC to 200 MHz
• Clock in to clock out: approximately 30 ns

Pattern Input

• Pattern input rate: 74AVC16244 (3.6 V maximum; no connect = logic 0)
• Pattern in to recognition: approximately 15 ns + 1 clock period