AEMC 6555 (2130.32) Megohmmeter: 15,000V, 30T Ohm

The Megohmmeter Model 6555 is a high-end portable measuring instrument intended for the measurement of a wide varity of electrical insulation resistance values on cables and devices operating at high voltage. It is the only fully automated 15,000V graphical insulation tester. The Model 6550 is packaged in a rugged case that is IP54 when closed. Test results and configuration information is provided on a graphical LCD screen as well as exportable through the use of DataView® software provided. This megohmmeter can operate on battery or AC power while testing.

The Model 6555 also offers the ability to program up to three step voltage profiles (from 40 to 15,000V), each containing up to ten steps. There are also three ramp profiles and three programmable test voltages in addition to the standard fixed voltages of 500, 1000, 2500, 5000, 10,000 and 15,000V.

• Detection and measurement of input voltage, frequency, and current prior to running a test
• Measurements at a fixed test voltage of 500, 1000, 2500, 5000, 10,000 or 15,000VDC
• Measurements at an adjustable test voltage between 40 and 15,000VDC
• Ramp voltage measurements with a ramp from 40 to 1100V or from 500 to 15,000V
• Step voltage measurements with steps from 40 to 15,000V
• Non-destructive (Early break) test, test stopped at a preset current (Break at I-limit) or Burn mode with no predefined stop point
• Digital filtering of insulation measurements
• Live measurement of the voltage to warn the operator of potential unsafe conditions
• Programmable thresholds to trigger audible
• Timed measurement duration checks
• Fuse protection with display indication of defective fuse condition
• Stores up to 80,000 measurements
• Optically-isolated USB communication for transfer onto PC and and report generation with the included DataView® software
• Includes: One red, blue and black 9ft 15kV integral lead (blue), one red, blue and black alligator clip (1000V CAT IV), optical USB cable, US 115V power cord, small classic tool bag and user manual

• Acceptance testing and preventive maintenance
• Test motors, pumps, valves, cables, switchgears and electrical wiring installations
• Continuity checks
• High resistance or absorption tests
• Spot reading tests
• Timed resistance measurements
• Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
• Multi-layer insulation testing (DD)
• Test old or water damaged installations over long time periods
• Motor insulation resistance measurements

• AEMC 6550_6555 Datasheet.pdf