TTC/ Acterna 41800 CCITT 2.048M/Nx64 kb/s Drop and Insert Interface

The TTC Acterna 41800 2.048M/Nx64K Data Interface allows the FIREBERD mainframe to test communications equipment and systems that comply with CCITT G.703, G.704, G.732, 2048 kbps, and Nx64 kbps signal recommendations for framed or unframed data.

The TTC Acterna 41800 2.048M/Nx64K Data Interface allows any selection of Nx64 kbps timeslots within the 2.048 Mbps signal to be accessed for bit error analysis. This allows real-time analysis of any number of timeslots (up to 30 o, 31, depending on the selected multiframing).

• Unframed or framed 2048 kbps signal analysis with TS-16 CAS (Channel Associated Signalling) and/or CRC4 multiframing.
• Nx64 kbps or Nx56 kbps analysis with unrestricted timeslot selection.
• Nx64 insert mode.
• Round-trip delay1 measurement.
• Frequency measurement.
• Timing Slips and Wander measurements (FIREBERD 6000 Only).
• Jitter measurements (FIREBERD 6000 with Jitter Option installed) .
• Positive and negative base-to-peak digital signal level measurements, in dB.
• In-service monitoring.
• G.821 performance analysis.
• Four selectable transmitter timing sources.
• Programmable timeslot and ABCD IDLE codes.
• Selectable MSB or LSB stuffing in Nx56 kbps analysis mode.
• Selectable voice coding: A-Law or m-Law.
• Single or consecutive FAS Word error insertion.
• Logic and/or code error insertion (single or variable rate).
• AMI or HDB3 coding.
• Test loopback.
• Voice mode through a telephone handset.
• ABCD signalling access with CAS multiframing.
• Selectable input termination, including MONITOR mode.
• Output line build-out level selection.
• Display Frame Alignment Signal, Not Frame Alignment Signal, Multiframe Alignment Signal, and Receive Byte of selected timeslot.
• Transmit alarms.
• Programmable TS0 national bits, international bits, and TS- 16 spare bits.
• Broadcast mode.
• 2Mbps alarm detection.