Tektronix TDS360 Digital Oscilloscope: 2 Channel, 200 MHz

All of the TDS 300 scopes sample at five times their bandwidth, assuring users of accurate real-time acquisition up to the full bandwidth of the scope, even for single-shot events. This is well beyond the theoretical two samples per period necessary for a DSO to acquire a true signal. If a DSO cannot sample at least twice as fast as the highest frequency component, aliasing occurs and the scope displays a waveform with a lower frequency than that of the actual input signal. The TDS 300 Series' high degree of oversampling not only minimizes aliasing, it also provides a higher resolution waveform.

• 200 MHz Bandwidth
• 1 GS/s Sampling Rate
• Two Input Channels
• Built-In 3.5 in. Floppy Disk Drive
• 2 mV/div to 10 V/div
• AutoSetup
• Accumulate Display Modes
• 2% Vertical Accuracy
• 1 K Record Length
• Roll Mode
• 21 Automatic Measurements
• FFT Analysis
• 10 ns Peak Detect for High-speed Glitch Capture
• Option 14 for GPIB, RS-232-C Programmability, Parallel Printer Interface, & VGA Monitor Output