Manufacturer:

Shimpo DT-311J Heavy-Duty Digital Stroboscope for Harsh, Wet Work Areas, 200 - 1,500 FPM

condition: Brand NewPart #: SH-DT-311JWeight: 6.00Availability: Call for Availability
Starting at $1,100.00
Select Options andADD to Cart
×

Calibration

Your Configured Product

SH-DT-311J
$1,100.00

Shimpo DT-311J stroboscopes - designed for harsh and wet work areas. Where powerful illumination and rugged speed measuring accuracy are required for the textile industry, the DT-311J will perform where other stroboscopes will not.

The DT-311J is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery.

Rugged-Drip Proof (IP65) Housing, High Performance Accuracy, Special Phase shifting, w/ Shock Absorbing components and top mounted handle, allows the equipment operator maximum flexibility when setting the timing of weaving machinery.

Harsh Environment NEMA 4X (IP65) Stroboscope with Included power 19.68’ (6m) cable, rubber strobe guard with
handle.

  • Internal signal “MODE” (flash) or external triggering control: Allow manual control and display of flash rate (RPM), deg (flash delay angle in degrees), and automatically synchronizes to an input signal Flash Range: 200 – 1,500 rpm
  • Phase “SHIFT” switch: Single touch – changes flash timing, 0-359 degrees Phase Shift: 0 – 359° / 1° increments
  • “ZERO” setting control: Zeroing at any angle is easy-single touch Internal signal range: 200 to 1,500 rpm / fpm
  • Long life flash tubes: Flash rates of 200-1500FPM, the DT-311J flash tubes are designed for extra long life Flash Rate/Phase: Rotary Encoder
  • Angle division “DIV”: Permits special flash interval ratio settings: 1/1, 1/2, 1/3, 1/4, and 2/4 flashes per rotation
  • Accessories included: 19.68 (6m) cable with connector, Instruction manual, rubber strobe guard with handle
Phase Shift 0° – 359° / 1° increments
Flash Rate/Phase Angle Setter Rotary dial
Display 4 digit 0.39 in (10 mm) high red LED
Divide Ratio 1/1, ½, 1/3, ¼, 2/4 with shift
Input Signal High level: 5-24 V pulse; Low Level: 0-1 V pulse. 2 msec minimum. Impedance less than 10k Ω
Input Impedance 47k
Display Mode Phase shift (degree), Tachometer
Accuracy ±1 digit
Internal Signal Range 200-1500 FPM
Flash Range 200-1500 FPM
FlashTube         Xenon lamp Max: 10w at 1,500 rpm. Life: 1,200 hours at 1,500 rpm
Flash Duration 10 to 40 μs automatically adjusts with flash rate
Lux Rating 8” (20 cm) Distance = 4500 lx @ 1500 fpm, 3375 lx @ 6000 fpm with 4.5″ (110 mm) irradiation diameter.

20” (50 cm) Distance = 1300 lx @ 1500 fpm, 930 lx @ 6000 fpm with 10″ (250 mm) irradiation diameter.

Power Requirement 115VAC ±5% 50/60Hz
Power Consumption 20VA max
Operating Temperature 32° to 104°F (0 to 40°C)
Product Weight 4.2 lbs (1.9 kg)
Warranty 2-Year
Included Accessories 19.68’ (6m) input/power cable with connector, rubber strobe guard w/ handle
Your product has been sucessfully added to the wishlist.
Name: Shimpo DT-311J Heavy-Duty Digital Stroboscope for Harsh, Wet Work Areas, 200 - 1,500 FPM
Quantity: 1
Cart Total: $1,100.00
Product has been added to your shopping cart.
Name: Shimpo DT-311J Heavy-Duty Digital Stroboscope for Harsh, Wet Work Areas, 200 - 1,500 FPM
Quantity: 1
Cart Total: $1,100.00
Product has been added to your shopping cart.
Name: Shimpo DT-311J Heavy-Duty Digital Stroboscope for Harsh, Wet Work Areas, 200 - 1,500 FPM
Quantity: 1
Cart Total: $$1,100.00

Create an Account

Already have an account? Login