Shimpo DT-205LR/ DT-207LR Handheld Contact/Non-Contact Laser Tachometer, 6 - 99,999 RPM

The Shimpo DT-207LR (LED) tachometer incorporates laser technology yet retains Shimpo's hallmark rugged construction and reliable quality components.

Series DT-200LR Combination Contact/NonContact Laser Tachometers Laser-enabled precise RPM measurement up to 20 feet. The Series DT-200LR digital tachometers incorporate laser technology yet retain Shimpo's hallmark rugged construction and reliable quality components.

Units offer incredible value and versatility as they can operate in non-contact and contact applications. These instruments feature a field-upgradeable contact adapter for linear rate measure, conveniently allowing both non-contact and contact measurements.

Incorporating the precise laser technology and user-friendly functions as the DT-200LR tachometer, the DT200LR-S12
provides an exceptional accuracy in measuring speed and length via its 12” wheel. The larger wheel rotates more slowly
than a standard 6” wheel, enabling reliable and safe registration of high speeds.

• Sophisticated laser beam detection: Safely allows RPM detection in hard- to-reach or dangerous areas
• Exceptional accuracy (±0.006% of reading): Assures reliable measurement results
• Length and rate functions: Offers expanded measurement capabilities
• Multi-mode speed selection: 9 selections allow optimum versatility
• Broad speed range (up to 99,999 RPM): Covers a wide range of applications
  Non-Contact range: 6 – 99,999 rpm
  Contact range: 0.8 – 25,000 rpm
• Hardy aluminum construction: Assures maintenance-free performance for many years
• Large 5 digit display: Numbers are easily readable
• Expansive 10 test memory capacity (selectable to 5 minutes or more): Stores last/min/max readings for thorough equipment/process inspection
• Extended battery life (25 – 40 hours): Advanced power management for longer operating times/increased productivity
• Free N.I.S.T. certificate: Permits easy compliance with regulations
• CE mark: Compliant with applicable EU directives
• Standard Accessories: Reflective tape, 2 cone adapters, funnel adapter, 3-1/2″ extension shaft, carrying case, NIST certificate, master wheel (6″ cir), and 200L adapter

• Measuring Range: 6 – 99,999 RPM
• Accuracy: ±1 RPM : 6 – 8,300 RPM; ±2 RPM : 8,300 – 25,000 RPM; ±0.006 % of reading ±1 digit (or 2 RPM max.) : 25,000 – 99,999 RPM
• Display: DT-205L: 5 digit 0.47″ (12 mm) high LCD/ DT-207L: 5 digit 0.4″ (10 mm) high LED
• Measuring Units: RPM (on contact using adapter, included)/ For rate : YPM, mPM, FPM, IPM and length : YRD, m, FT, IN use 6″ cir. wheel with 200L adapter
• Memory: 13 readings are stored in memory and retained for 5 minutes (last, max., min. and 10 extra measurements)
• Display Update Time: 1 second (typical)
• Detection: Laser diode
• System Control: Single-chip C-MOS microprocessor
• Over Range Indicator: Flashing numerals
• Voltage Requirement: 2 AA 1.5 V batteries
• Auto Power Shut-Off: Yes
• Operating Temperature Range: 32° – 113° F ( 0 – 45° C )
• Construction: Die-cast aluminum housing
• Dimensions: 6.6″ L x 2.4″ W x 1.8″ H (167.5 mm x 60 mm x 46 mm)
• Warranty: 1 year
• Standard Accessories: Reflective tape, cone adapter, carrying case, NIST certificate, 1 master wheel (6″ cir.) and 200L adapter

• DT-200LR_Series.pdf