| Rigol ATTENUATOR-40, 40 dB Attenuator | Request a Quote | |
| Rigol BNC Cable (length 1 meter) | Request a Quote | |
| Rigol PA1011 Power Amplifier, 10W | Request a Quote | |
| Rigol RS-232 Serial Data Cable 1.5 M | Request a Quote |
Rigol DG2000 series function/arbitrary waveform generators use Direct Digital Synthesis (DDS) technology. They could generate accurate, stable, clean, low distortion signals.
| Frequency Characteristic | |
| Waveforms | Sine, Square, Ramp, Triangle, Pulse, Noise, DC, Arb |
| Sine | 1 µHz to 40 MHz |
| Square | 1µ Hz to 40 MHz |
| Pulse | 500 µHz to 16 MHz |
| Ramp | 1 µHz to 500 kHz |
| White Noise | 10 MHz bandwidth (-3 dB) |
| Square Wave Characteristic | |
| Rise/Fall Time | < 8 ns (10% to 90%) |
| Overshoot | < 2% |
| Duty Cycle | 20% to 80% (to 10 MHz) |
| Asymmetry | 1% of period+ 5 ns |
| (below 50% Duty Cycle) | |
| Ramp | 1 µHz to 1 MHz |
| Jitter | 300 ps + 100 ppm of period |
| Pulse Wave Characteristics | |
| Pulse Width | 2000 s max period; 8ns min period; 1ns resolution |
| Variable Edge Time | 5 ns to 1 ms |
| Overshoot | < 2% |
| Jitter | 300 ps + 0.1 ppm of the period |
| Arb Wave Characteristics | |
| Frequency Range | 1 µHz to 12 MHz |
| Waveform Length | 2 to 512 K points |
| Amplitude Accuracy | 14 bits (including sign) |
| Sample Rate | 100 MSa/s |
| Minimum Edge Time | 10 ns |
| Jitter (RMS) | 2.5 ns + 30 ppm |
| Non-Volatile Storage | 4 waveforms |
| Output Characteristics | |
| Amplitude | 10 mVpp – 10 Vpp (50 ) |
| 20 mVpp – 20 Vpp (High Z) | |
| Amplitude Accuracy (100 kHz) | ± 1% of setting ± 1 mVpp |
| Amplitude Flatness (sinewave relative to 100 kHz) | < 10 MHz 0.1 dB (± 1%) |
| 10 MHz to 25 MHz 0.15 dB (± 1.5%) | |
| 25 MHz to 40 MHz 0.4 dB (± 4.0%) | |
| Other Parameters | |
| Clock Reference | 10 MHz |
| I/O | USB Host, USB Device, RS-232, LAN/GPIB |
| Optional Configuration | Digital Logic Output Module |
| AM Modulation | |
| Carrier Waveforms | Sine, Square, Ramp, Arb |
| Source | Internal/ External |
| Modulating Waveforms | Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz) |
| Depth | 0% – 120% |
| FM Modulation | |
| Carrier Waveforms | Sine, Square, Ramp, Arb |
| Source | Internal/ External |
| Modulating Waveforms | Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz) |
| Frequency Deviation | DC to 5 MHz |
| PM Modulation | |
| Carrier Waveforms | Sine, Square, Ramp, Arb |
| Source | Internal/ External |
| Modulating Waveforms | Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz) |
| Phase Deviation | 0 to 360° |
| FSK Modulation | |
| Carrier Waveforms | Pulse |
| Source | Internal/ External |
| Modulating Waveforms | 50% duty cycle square (2 mHz to 100 kHz) |
| PWM Modulation | |
| Carrier Waveforms | Pulse |
| Source | Internal/ External |
| Modulating Waveforms | The pulse width 0% to 100% |
| Sweep | |
| Carrier Waveforms | Sine, Square, Ramp, Arb |
| Type | Linear or Logarithmic |
| Direction | Up or Down |
| Sweep Time | 1 ms to 500 s ± 0.1% |
| Source | Internal/External/Manual |
| Marker | Falling edge of Sync signal (Programmable Frequency) |
| Burst | |
| Waveforms | Sine, Square, Ramp, Pulse, Noise, Arb |
| Types | count (1 to 50,000 periods), infinite, gated |
| Start Phase | -360° to +360° |
| Internal Period | 1 ms – 500 s ± 1% |
| Gate Source | External Trigger |
| Trigger Source | Internal/External/Manual |
| Other Parameters | |
| Built-in Help | Multiple language |
| Power | 100-240 VACRMS, 45-440 Hz, 50 W |
| Weight | 2.7 kg |