TOLL FREE : 1-866-363-6634
A Service-Disabled Veteran-Owned Small Business
DISCONTINUED ITEM
The 4233 meets EN61010 Category III Requirements. With wide choice of attenuation ratio, the 4233 is capable of making full range (from millivolts to ±1400V) measurements of floating signals in power electronic circuits.
| Bandwidth | DC-100MHz |
|---|---|
| Input Impedance | 4 M Ohm //7pF each side to ground |
| Attenuation | 1:10/100 |
| Input Voltage Differential Range |
+70V (DC + Peak AC) or 70Vrms @ 1/10 +700V (DC + Peak AC) or 500 Vrms @ 1/100 |
| Input Voltage Common Mode Voltage |
+700V (DC + Peak AC) or 500 Vrms @ 1/10 & 1/100 |
| Absolute Max. Input Voltage (each side to ground) | +1000Vrms , CAT III @ 1/10 & 1/100 |
| Accuracy | + 2% |
|
Output Voltage |
|
| Swing | + 7V(into 50k Ohm load) |
| Offset (typical) | <+5mV |
| Noise (typical) | 0.9mVrms |
| Source Impedance (typical) | 50 Ohm |
| CMRR (typical) | -85dB @ 50Hz, -55dB @ 1 MHz |
|
Power Requirements |
|
| Standard | 4 x AA cells or 9VDC Adapter (both Included) |
| Options | Power Leads |
| Weight | 0.9 lb |
| Dimensions (LxWxH) | 8″ x 3 1/4″ x 1 1/2″ |
