Mountz RTSX-A Rotary Torque & Angle Sensor

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

• Ability to measure the rotation angle of a fastener. Joint rate & breakaway torque can be measured too.
• Angle output: 2-channel quadrature, 360 pulses per rotation.
• Bi-directional.
• For use with most power tools and rotational measurement applications.
• Features “ARC II” technology, an instant auto-recognition system of the RTSX-A connected to the PTT or LTT.

• Output at Rated Capacity:
  </= 6 Nm [53 lbf.in] rated torque 1 mV/V
  > 6 Nm [53 lbf.in] rated torque 2 mV/V
• Interchanegeability: Matched for mv/v and shunt calibration +0.3% FS
• Nonlinearity: +0.2% FS
• Excitation Recommended: 12V DC or AC RMS
• Bridge Resistance: 350 ohms
• Usable Temperature Range: 41-122 degrees F
• Mating Connector: Bendix PTO6A-12
• Safe Overload: 125% of rated ouput

• Mountz RTSX-A Torque Datasheet.pdf