Hioki PD3129 Phase Detector

Non-Metallic Contact for Optimal Safety

• Top “primary supply level” safety class rating for phase detectors
• No metallic exposure ensures absolutely safety to the operator
• Wide clips compatible to thick cables of up to 40mm in diameter.( Model PD3129-10)
• Magnetic adapter, Fixable to distribution boards
• Top “primary supply level” safety class rating for phase detectors
  CAT III 600V design meets CE Mark qualifications.
• Conveniently caters to virtually all wiring Environments
• Provides both visual and audible phase detection
• Detects phase on insulated conductors
• Auto power-off function prevents inadvertent battery discharge

• Measurement Function : Phase detection (positive,negative),live wire check (R-S/S-T only)
• Voltage Detection Method : Electrostatic induction method
• Model PD3129 Voltage Range : 70 to 600V AC (50/60Hz)(sine wave,continuous input)
• Model PD3129-10: Voltage Range : 70 to 1000VAC (50/60Hz)(sine wave,continuous input)
• Model PD3129 Clamp Diameter : 2.4mm(0.09in) to 17mm(0.67in) of insulated wiring
• Model PD3129-10 Clamp Diameter : 7mm(0.28in) to 40mm(1.57in) of insulated wiring
• Battery Check Function : ON lamp blinks to indicate battery low status when instrument is turned on
• Auto Power Off : Auto shut off if no activity is detected after power is turned ON for 15 minutes
• Power supply : Two AA size batteries × 2 (rated voltage:DC3.0V; maximum rated ower:300mVA)
• Continuous Use : approx.70 hours (standby)
• Dimensions, mass : 70 mm (2.76 in)W × 75 mm (2.95 in)H × 30 mm (1.18 in)D, 200 g (7.1 oz),
• Cord length : 0.7m(27.56 in)

• Hioki PD3129 Datasheet