Hioki 7075 Arbitrary Waveform Generator, 10 MHz, 2 or 4 Channel

DISCONTINUED ITEM
This model includes both function generator and arbitrary waveform generator capabilities. The function generator provides 8 standard waveforms such as sine and square waves. Basic capabilities of the arbitrary waveform allow long-duration, high-quality waveform output from a 128 k-word memory, 10 MHz clock rate and 16-bit resolution, making this waveform generator ideal for simulating multiple signal sources for evaluation.

• Multiple Channels. Four channels (7075) or two channels (7075-01) are provided in a compact, lightweight unit. Multi-channel evaluations such as 3-phase motor simulations can be produced with a single device.
• Channel-Independent Operation. Waveform selection and various settings, including custom waveform sampling clock frequency and sweep control can be set and activated independently for each channel.
• Simple Operation. Simple, direct operation is provided by a touch panel user interface.
• Easy to Use with Actual Waveforms. Waveforms measured with a MEMORY HiCORDER can be downloaded to 3.5″ floppy disk or GP-IB. Amplitude and time axes data are downloaded together, so the actual waveforms can be reconstructed. Waveforms and settings can also be saved. The floppy drive is compatible with 1.44-MB MS-DOS format.
• Synchronized Drive Capability. With one unit configured as the master, up to four units(16 channels) can be driven synchronously.
• Timing Simulation by External Trigger. Each channel can be independently triggered by terminals on the rear, so various timings can be simulated.
• Bundled Waveform Creation Software. The bundled 7990 WAVEFORM CREATION SOFTWARE creates waveforms in the Windows environment on a PC. Capabilities range from customwaveform design to processing actual waveform simulations. Created waveforms are transferred to the7075 by floppy disk or RS-232C interface.
• External Control. External control can be provided through the GP-IB interface. Waveforms from a MEMORY HiCORDER can also be downloaded by GP-IB.
• Eight Basic Waveforms Built In. Eight basic waveforms: sine, square, pulse, triangle, ramp up, ramp down, noise and DC are selectable in the function generator mode. Eight waveforms can also be stored in the arbitrary waveform mode, allowing quick handling of all types of waveforms.

• Number of Channels: 7075: 4-channels, 7075-01: 2-channels
• Output Functions: Function generator, Arbitrary waveform generator (for each channel)
• Max. Output Voltage: ±10 V o.c. (o.c.=open-circuit)
• Amplitude Setting Ranges: 10 V range: 10 mV to 10 V o.c. (1 mV resolution) 1 V range: 1 mV to 1 V o.c. (0.1 mV resolution) 0.1 V range: 0.1 mV to 0.1 V o.c. (0.01 mV resolution)
• Minimum Load Impedance: 40 Ohm
• Output Impedance: 50 Ohm ±2 % (DC)
• Function Generator Mode: Waveform types: sine, square (fixed 50 % duty), triangle, ramp-up, ramp-down, pulse, noise, DC, Frequency range:sine (10 mHz to 10 MHz), square (10 mHz to 10 MHz), triangle (10 mHz to 200 kHz), pulse (10 mHz to 200 kHz)
• Arbitrary Waveform  Generation Mode: Voltage axis resolution: 16 bits (64000 counts) Waveform memory capacity: 128 kW/ch Filtering: 2-stage LPF, 50 Hz to 1 MHz, 14 steps, Waveform input methods: FD/GP-IB (direct download from MEMORY HiCORDER by FD or GP-IB), or RS-232C download (at use of 7990), Arbitrary waveform clock: Max. 4ch, Frequency range: 10 mHz to 10 MHz (10 mHz resolution)
• Display: 5.7-inch LCD (with touch panel)
• Data Storage: FDD x 1, MS-DOS format
• Power Supply: 100/120/200/230 V AC/auto selects, (50/60 Hz)
• Dimensions, Mass : 345 mm(13.58 in)W × 130 mm(5.12 in)H × 286 mm(11.26 in)D, 7075: 7.8 kg (275.1 oz), 7075-01:7.5 kg (264.6 oz)
• Standard Accessories:  WAVEFORM CREATION SOFTWARE 7990 (FD x3)

• Hioki 7075 Data Sheet.pdf