Chat with us, powered by LiveChat
Manufacturer:

Agilent / HP E3634A Programmable DC Power Supply, 25V / 7A or 50V / 4A

condition: Pre-OwnedPart #: HP E3634AAvailability: Ships within 5-7 days
Starting at $1,450.00
Select Options andView Options
×

Warranty Options

Your Configured Product

HP E3634A
$1,450.00
Availability: Ships within 5-7 days
Request Repair / Calibration

E3634A

E3632A/33A/34A single-output dual range power supplies

These single output power supplies give you the flexibility to select from a dual output range. The output load is protected against overvoltage and overcurrent, which are easily monitored and adjusted from the front panel and remote interface. Remote sensing is available to eliminate the errors caused by voltage drops on the load leads. The E3633A/34A offer front and rear output terminals for easy wiring.

Excellent performance you can trust

With the 0.01% load and line regulation, the E363xA Series can maintain a steady output when power line and load changes occur. The power supplies specify both normal mode voltage/current noise and common mode current noise. The low normal mode noise specification assures clean power for precision circuitry applications, and the low common mode current provides isolation from power line current injection.

Remote interface

If you have an IEEE-488 card or RS-232 in a PC, these power supplies will work for you. Every model comes equipped with both GPIB and RS-232 as standard. All programming is done in easy-to-use SCPI (Standard Commands for Programmable Instruments). The user’s guide describes the process for the first-time programmers.

Front panel operation

A knob and self-guiding keypads allow you to set the output at your desired resolution quickly and easily. You can store and recall for up to three complete setups using the internal non-volatile memory. The output on/off button sets the output to zero

Highlights

  • 200 W single power supply
  • Dual range output
  • Low noise and excellent regulation
  • Remote sensing
  • Front and rear output terminals
  • GPIB and RS-232 standard
  • Save and recall functions
  • Overvoltage protection
  • Overcurrent protection
  • Range 1: 25V/ 7A
  • Range 2: 50V/ 4A
  • 200 W single power supply
  • Front and rear output terminals
  • Dual range output
  • Low noise and excellent regulation
  • Remote sensing
  • GPIB and RS-232 standard
  • Save and recall functions
  • Overvoltage protection
  • Overcurrent protection
Your product has been sucessfully added to the wishlist.
Name: Agilent / HP E3634A Programmable DC Power Supply, 25V / 7A or 50V / 4A
Quantity: 1
Cart Total: $1,450.00
Product has been added to your shopping cart.
Name: Agilent / HP E3634A Programmable DC Power Supply, 25V / 7A or 50V / 4A
Quantity: 1
Cart Total: $1,450.00
Processing...

Create an Account

Already have an account? Login