AEMC SL261 Oscilloscopes & BNC Terminated Probes

The Model SL261 is a portable 100A peak current probe with insulated BNC output cable that can accurately measure AC or DC current waveforms. The unit has proportional mV output for direct readings on oscilloscopes. Three position slide switch on handle selects ranges and ON/OFF.

• Oscilloscope current probe for applications in industrial and power environments
• Analyze, measure and accurately display distorted current waveforms and harmonics
• Current range from 100mA to 100AAC/DC
• Direct BNC connection to scope
• Jaw designed for easy maneuvering in crowded spaces

• Oscilloscope applications in industrial or power environments
• Analysis and measurement of distorted current waveforms and harmonics

• Nominal Range : 10A & 100A
• Measurement Range : 100mA to 100A
• Transformation Ratio : Voltage output
• Output Signal  : 10A: 100mV/A
•                           : 100A: 10mV/A
• Accuracy
• (100mV/A Range)
• 50mA to 10A Peak   : 3% of Reading ± 50mA
• 500mA to 40A Peak : ±4% of Reading ± 50mA
• 40A to 100A Peak     :±15% max @ 100A
• Phase Shift
• (10mV/A Range) DC     : to 65Hz 1.5°
• Overload  : Red LED indicates input greater than the selected range
• Frequency Range : DC to 100kHz (-3dB with current derating)
• Load Impedance : >1MΩ/100pF
• Working/Common
• Mode Voltage         : 600Vrms
• Output Termination : 6.5 ft coaxial cable
• Operating Temperature : 32° to 122°F (0° to 50°C)
• Storage Temperature : -22° to 176°F (-30° to 80°C)
• Operating Relative : 10° to 30°C: 85 ± 5% RH (without condensation)
• Humidity                   : 40° to 50°C: 45 ± 5% RH (without condensation)
• Maximum Conductor Size : 0.46″ (11.8mm)
• Dimensions : 9.09 x 1.42 x 2.64″ (231 x 36 x 67mm)
• Weight : 11.6 oz (330g) with battery
• Polycarbonate Material : Handle: Lexan® 920A, UL94 V2
• Electrical : EN 61010-2-32
• UL Approval : Yes – Canada and United States
• Double Insulation : Yes
• CE Mark : Yes