AEMC MR500 Series AC/DC Current Probes

DISCONTINUED ITEM

The AEMC MR Series AC/DC Probes are professional AC/DC current probes designed to extend current measuring capabilities of DMMS, oscilloscopes and other instruments.  They are built to the latest safety and performance standards, including the CE Mark and UL approval.  Two different hook-shaped jaws are offered, both permitting the user to "pry" or "hook" onto cables (will accept 2 x 500MCM) or even onto small buss bars.

The MR Series probes use Hall effect technology and measure AC and DC current.  The electronics and batteries are self-contained in the handles.  The output of the AC/DC probes is 1mV/A and 10mV/A.

There is no output filtering-True RMS with DC component measurements are possible.  Phase shift is excellent, making the MR Series of current probes well suited for power and power quality applications.

• Measurement range of 100AAC/150ADC & 1000AAC/1500ADC
• Conforms to EN 61010, 600V Cat. III
• Designed for DMMs, recorders, oscilloscopes, power and harmonic meters

• DC motors
• Batteries
• Automobile engine testing
• Power measuring quality analysis
• Power load monitoring

• Nominal Range : 100Aac/150Adc &
•                               : 1000Aac/1500Adc
• Measurement Range : 0.2 to 1500A
• Output Signal : 150A :10mV/A
•                           : 1500A : 1mV/A
• Overload : 1000Aac and 1500Adc
• continuous up to : 1kHz
• Frequency Range : DC to 10kHz @ -3dB
• L oad Impedance : >100kΩ/100pF
• Working/Common
• Mode Voltage : 600Vrms
• Battery : 9V Alkaline
•               : (Approx. 50 hours life)
• Output Termination : 5 ft Lead (MR521;) 6 ft BNC (MR561)
• Operating Temperature : 14° to 131°F (-10° to 55°C)
• Storage Temperature : -40° to 176°F (-40° to 80°C)
• Operating Relative
• Humidity : 10 to 35°C 90% ± 5% RH (without condensation), 40 to 55°C 70% ± 5% RH (without condensation)
• Zero Adjustment :  Auto-zero
• Jaw Opening : 1.55″ (40mm)
• Maximum Conductor Size : One 1.5″ (39mm) or two 0.95″ (24mm) or two bus bars 1.96 x 0.19″ (50 x 5mm)
•                                                 : or one bus bar 1.96 x 0.49″ (50 x 12.5mm)
• Dimensions : 9.31 x 3.82 x 1.73″ (236 x 97 x 44mm)
• Weight : 1.06 lb (480g)
• Polycarbonate Material : Handles: Polycarbonate + ABS, Gray, UL94 V0. Jaws: Polycarbonate, Red, UL94 V0
• Electrical : EN 61010-2-32
• Double Insulation : Yes
• CE Mark : Yes