AEMC CA7028 (2127.82) Wire Mapper Pro, LAN & Cable Tester

The Wire Mapper Pro^® Model CA7028 is a hand-held structured cable mapping and troubleshooting tester designed for use on UTP, STP, FTPand SSTP cabling equipped with RJ-45 connectors and wired to either TIA568A/B (ISO11801 and EN 50137), USOC or ISDN specifications. It detects open circuit pairs, shorts, crossed wires, crossed pairs, reversed pairs, split pairs and shield faults.

In the event of opens and shorts, the Model CA7028 uses TDR technology to indicate if the fault is at the near end or the remote end of the cable, or if it is somewhere in between. It will then indicate the distance to the fault. The Model CA7028 has the ability to measure and indicate the length of the cable under test, using a Vp (Velocity of Propagation) set by the user, from a built-in library or manually. It will measure and report the length of all four pairs of wires in the cable under test. It also generates an audible tone that is transmitted into all four pairs on the cable under test. This can be used for cable tracing and identification in conjunction with a tone receiver.

The Model CA7028 also has the ability to identify telephone and data lines. If the main unit is plugged into an operational RJ-45 socket, it will give a continuous warning tone and display if a telephone voltage is present on any of the pins. If the Service Detect key is pressed, it will check and display telephone, 10BaseT, 100Mbit+ and token ring active service

• Indicates all common wiring faults including split pairs, shorts, opens, reversed pairs and crossed wires
• Unique graphical and digital display of fault information and length
• Indicates distances to opens and shorts and identifies locations
• Built-in tone generator for tracing and locating cables
• Built-in service check function to detect telephone, 10BaseT, 100Mbit+ and token ring
• Visual and audible warning of live telephone network voltages
• Works with all Category 6 cables
• Large high-visibility blue electrolumiscent backlit display
• Active remote identifiers indicate Pass/Fail at remote end
• Up to 16 unique remote identifiers available
• Works with TIA 568A/B, USOC and ISDN wiring schemes
• CE Mark

• Identify LAN wiring faults
• Find distances (feet or meters) to opens and shorts
• Test patch cords
• Test for active service
• Trace cable locations
• Measure cable length
• Map network layout

• Range : 500 ft (150m)
• Accuracy : ±5%
• Cable Types : UTP, STP, FTP & SSTP
• Faults Indicated : Short Circuit Pair, Open Circuit Wire, Short Between Pairs,

:Split/Cross Pairs, Pair Reversals, Shield Continuity

• Fault Location : Near end, remote end or distance to fault
• Wiring Schemes : TIA 568A/B, USOC & ISDN
• Service Indication : Telephone, 10BaseT, 100Mbit+, Token Ring
• Test Inhibit : Inhibits testing in the presence of live voltages
• Tone Generator : Oscillating 810 to 1110Hz
• Voltage Warning : Audible and visual warning of TNV (Telecom Network Voltage) presence
• Display Resolution : 128 x 64 pixel graphical LCD
• Display Backlight :Blue electroluminescent
• Fault Display : All fault and setting info displayed textually and graphically
• Remote Display : Green/Red Pass/Fail LED
• Auto-Off : After 3 minutes
• Languages : English, French, German, Spanish, Portuguese, Italian
• Power Source : 4 x 1.5V AA Alkaline batteries
• Battery Life : Standby mode >4000 hrs
• Continuous testing : >7.5 hrs
• Battery Life : Indication Bargraph
• Storage Temperature : -4° to 158°F (0° to 70°C); 5 to 95% RH non-condensing
• Operating Temperature :32° to 112°F (0° to 40°C); 5 to 95% RH non-condensing
• Dimensions : Main unit: 6.5 x 3.5 x 1.5″ (165 x 90 x 37mm)

:Remote unit: 2.5 x 2.0 x 1.0″ (65 x 52 x 25mm)

• Weight : Main unit: 12 oz (350g); Remote unit: 1.5 oz (40g)
• Index of Protection : IP54

• AEMC CA7028 Datasheet.pdf
• AEMC-CA7028 User Manual.pdf