AEMC 1026 (2117.72) Megohmmeter,1000V

DISCONTINUED ITEM-Recommended Replacement: AEMC 6527 (2126.53) Megohmmeter: 1000V, 4G Ohm

The Megohmmeter Model 1026 is a compact, lightweight, battery-operated , hand-held meter. It provides four functional tests. It is a megohmmeter, DC voltmeter, AC voltmeter, ohmmeter and a continuity tester. The Model 1026 tests at 250V, 500V and 1000V and measures insulation resistance from 1kΩ to 4000MΩ.The Model 1026 also features a continuity test range with audible beeper for resistances under 40Ω, and a 600VAC range for safety voltage check. In addition, the Model 1026 has an ohmmeter to measure from 0.1Ω to 4000Ω.The Model 1026 is supplied with test leads, clips, batteries, soft carrying case and a user manual.

• Test voltage combinations of 250V, 500V and 1000V
• Insulation measurements to 4000MΩ
• Resistance measurement to 4000Ω
• Continuity test
• Continuity beeper
• 600VAC/DC test voltage range
• Large, easy-to-read display
• Data hold switch
• Test button may be locked-on for three minutes for hands-free operation
• Automatic discharge when test button is released
• Low battery indication
• Supplied with a soft carrying case and test leads

• Test insulation on cables, transformers, motors, insulators and wiring installations
• High resistance or absorption tests
• Spot reading tests
• Timed resistance measurements
• Dielectric (DAR) and polarization (PI) tests
• Low insulation test range for testing old or flooded installations
• Motor insulation resistance measurements
• Continuity checks and low resistance measurements
• Computer controlled production line testing
• Predictive maintenance by storing results in PC for trend analysis

• Accuracy : < 2000MΩ ±3% of Reading ± 5cts
• Accuracy: >2000MΩ ±5% of Reading ± 5cts
• Beeper Activation : Displays Ω and beeps below 40Ω
• Overload Protection : 600Vrms
• Measurement Range : 0 to 600Vac/dc
• Resolution : 0.1V
• Accuracy* : AC ±1.5% of Reading ± 5cts
• Accuracy* : DC ±1% of Reading ± 3cts
• Digital Display : 3 x 1.7″ (76 x 42mm) (LCD panel with 40-segments analog bar indication)
• Overrange Indication :  “OL” will be shown on the LCD Panel when out of range measurement is made
• Low Battery Indication : The will be shown when the batteries need to be changed
• Sampling Rate : 2.5 times/sec digital display; 10 times/sec bar graph
• Power Source : 8 x 1.5V AA batteries
• Dimensions : 7.72 x 4.41 x 2.52″ (196 x 112 x 64mm)
• Weight : 1.5 lbs (700g)
• Temperature Range : Operating: 32° to 104°F (0° to 40°C), below 80% RH; Storage: 14° to 140°F (-10° to 60°C)
• Safety Rating : EN 61010, 600V, Cat. III, Pollution Degree 2, Altitude up to 6000 ft (2000m), EN50081-1; EN50082-1
• CE Mark : Yes

*Accuracles are at 23°C ±5°C, below 80% RH

• AEMC 1026 Datasheet.pdf